Skip to content
OCRVEmpire

Services

Fleet and Commercial Body Services

The short answer

Fleet and commercial body work covers cab and box repair, reefer skin and liner, lift gates, service and utility bodies, toolboxes and crane bodies, headache racks, shelving and partitions, fleet graphics and wrap, and DOT reflective marking. In-shop body, paint, structural, and equipment install only.

01

How this category works

Fleet work is measured in downtime, not in hours. A box truck out of service is a route not running, so the entire job gets planned around getting the unit back rather than around shop convenience. We do body, paint, structural, and equipment installation. We do not perform engine, drivetrain, or DOT inspection work, and we will tell you that on the first call rather than after your truck is on our lot.

Posted labor rate for this category: Body and paint, $210/hr.

Location: All work is performed at our Yorba Linda facility. We do not offer mobile, roadside, or fleet route service.

02

Every fleet and commercial body service

Fleet and Commercial Body services with price ranges and shop hours
ServiceTypical rangeShop hours
Fleet Collision Repair and Refinish

Fleet collision repair returns a damaged commercial truck or van to service after an impact, covering cab sheet metal, box structure, frame correction, and refinish in company colors.

$1,500 to $50,000+10 to 250+
Cab Body Repair, Door Hood Fender and Bumper

Cab body repair addresses door, hood, fender, bumper, mirror, and step damage on a commercial cab without opening up a full collision job.

$750 to $12,0005 to 60
Box and Cargo Body Repair, Aluminum and Composite

Box and cargo body repair rebuilds corner posts, rear frames, top rails, side skins, and floors on aluminum and composite dry van bodies.

$750 to $15,0005 to 80
Reefer and Insulated Box Skin and Liner Repair

Reefer box repair restores the outer skin, foam core, and interior FRP liner on insulated bodies so the box holds temperature again.

$1,000 to $18,0008 to 80
Roll-Up and Swing Door Service

Roll-up and swing door service covers panels, rollers, tracks, counterbalance springs, cables, hinges, cam locks, and seals on commercial cargo doors.

$400 to $4,5002 to 18
Lift Gate Installation and Repair

Lift gate work covers new installation, replacement, and repair of rail, tuck-under, cantilever, and column gates including mounting, hydraulics, and power cabling.

$1,500 to $8,5008 to 35
Service Body and Utility Body Installation

Service and utility body installation mounts a new or transferred body to a chassis cab, including subframe, wiring, lighting, bumper, and compliance items.

$2,500 to $15,00015 to 60
Toolbox and Crane Body Installation

Toolbox and crane body installation covers cross boxes, side boxes, underbody boxes, and crane-equipped service bodies including subframe reinforcement and outrigger mounting.

$1,500 to $10,00010 to 40
Headache Rack and Cab Guard Installation

Headache rack and cab guard installation protects the cab from shifting loads on flatbeds, stake beds, and pickups, including mounting, reinforcement, and light integration.

$750 to $3,5004 to 14
Fifth Wheel Plate Installation

Fifth wheel plate installation mounts in-bed fifth wheel and gooseneck hitch systems with frame brackets, under-bed rails, and wiring on pickups and chassis cabs.

$1,500 to $5,5008 to 22
Light Bar, Strobe and Emergency Lighting Installation

Emergency and warning lighting installation covers light bars, hideaway strobes, traffic advisors, sirens, and switch panels with proper fusing, routing, and grounding.

$400 to $3,5002 to 14
DOT Reflective Tape and Compliance Marking

DOT conspicuity tape and compliance marking installs certified reflective sheeting and required lettering including USDOT numbers, unit numbers, and carrier identification.

$250 to $1,2001 to 6
Bulkhead and Partition Installation

Bulkhead and partition installation separates the cargo area from the cab on vans and cutaways using solid, window, or door-equipped partitions with correct anchoring.

$400 to $2,5002 to 10
Cargo Floor and Liner Installation

Cargo floor and liner installation covers plywood and composite flooring, aluminum tread plate, wall and door liners, and spray-on floor coatings in vans and bodies.

$400 to $4,5002 to 18
Fleet Graphics and Vinyl Wrap

Fleet graphics and wrap covers partial and full vinyl wraps, cut lettering, spot graphics, and removal on commercial vans, trucks, and bodies.

$1,500 to $9,50010 to 45
E-Track, D-Ring and Tie-Down Installation

E-track and tie-down installation adds horizontal and vertical E-track, D-rings, and anchor points to van and truck cargo areas with proper backing and load-rated attachment.

$250 to $2,5001 to 10

Not sure which service you need? Describe the damage and we will tell you.