Skip to content
OCRVEmpire

Interior and Cabinetry

RV Countertop Repair and Replacement in Solid Surface, Quartz and Laminate

Typical range

$500 to $6,500

Shop hours

4 to 28

Labor rate

$210/hr

The short answer

Countertop work covers repairing chipped and delaminated tops and replacing galley, bath vanity, and dinette surfaces in solid surface, quartz, butcher block, or high pressure laminate. Jobs run $500 to $6,500, or 4 to 28 hours at $210 per hour plus materials, templated and installed at Yorba Linda.

01

What this work actually involves

The countertop in an RV lives a harder life than one in a house. It is cantilevered over a lightweight cabinet run, it flexes every time the coach crosses an expansion joint on the 91 or the 15, and it goes through a 90 degree temperature swing between a February night in Lancaster and an August afternoon in Indio. That is why factory laminate tops split at the sink cutout and why an improperly supported stone top cracks at the narrowest point, which is almost always the strip between the sink and the front edge.

Material choice follows from that. Solid surface such as Corian is the most forgiving option for an RV because it is repairable in place, seams can be made invisible, and chips can be sanded out rather than replaced. Quartz looks superb and is very hard, but it is heavy and unforgiving of substrate flex, so it needs a continuous supported deck underneath rather than the open-frame cabinet top most coaches ship with. Laminate is light and inexpensive and is still the right answer on a weight-critical trailer.

We template after the cabinets are permanently set, never before, and never from a drawing. Coach cabinet runs are not straight, the walls are not plumb, and the floor is not flat, so a top cut to nominal dimensions will show a gap somewhere along the backsplash every time. Templating on the installed cabinets with the coach sitting level, then scribing the backsplash to the actual wall line, is what separates a top that reads as factory from one that obviously got added later.

Systems and brands we work on: Corian.

Location: All work is performed at our Yorba Linda facility. We do not offer mobile, roadside, or fleet route service.

02

What the job includes

  • Chip, crack, and burn repair in solid surface with color-matched fill and refinish
  • Delaminated laminate top repair and edge banding replacement
  • Full galley, bath vanity, and dinette top replacement
  • Solid surface, quartz, butcher block, and high pressure laminate options
  • On-site templating after cabinets are permanently set
  • Substrate deck construction and support added under heavy stone tops
  • Sink and cooktop cutouts with reinforced spans at narrow sections
  • Undermount and drop-in sink installation with correct sealing
  • Backsplash fabrication and scribing to out-of-plumb coach walls
  • Plumbing disconnect and reconnect at the faucet and drain for the swap

03

When you need this service

  • A split or crack running from a corner of the sink or cooktop cutout
  • Laminate lifting at the front edge or separating at a seam
  • A soft or swollen particle board substrate visible at the sink perimeter
  • A stone or solid surface top that flexes or rocks when leaned on
  • Deep scratching, burn marks, or staining that will not clean up
  • A gap between the backsplash and the wall that has opened with age
  • A dated pattern that no longer matches new flooring or cabinetry

04

How we do it, step by step

  1. 01

    Assessment and material selection

    Existing top and its substrate evaluated together, then material options reviewed against weight, repairability, and how much cabinet support your coach actually has.

  2. 02

    Repair versus replace call

    Solid surface chips and small cracks are frequently repairable in place. A laminate top with a swollen particle board core is not, and we will say so rather than sell a cosmetic fix.

  3. 03

    Removal and substrate inspection

    Faucet and drain disconnected, old top lifted, and the cabinet top rails checked for water damage and adequacy for the new material weight.

  4. 04

    Support deck construction

    For quartz or stone we build a continuous supported deck across the cabinet run so the slab is not spanning open frame, which is what cracks tops at the sink strip.

  5. 05

    Templating

    Template made on the installed cabinets with the coach level, capturing the real wall line rather than the drawing, then fabrication ordered from that template.

  6. 06

    Installation and scribe

    Top set, seams joined and finished, backsplash scribed to the wall, and cutouts fitted with reinforcement at any narrow section.

  7. 07

    Plumbing reconnect and check

    Sink and faucet reinstalled and sealed, supply and drain reconnected, and the system pressure checked for leaks before delivery.

05

Pricing and posted rates

Pricing for Countertop Repair and Replacement
ItemRate or rangeNotes
Typical job range$500 to $6,500Varies with extent of damage and parts availability
Shop hours4 to 28Quoted after teardown, not before
Body and paint labor$210 per hour2026 posted rate
Paint supplies$55 per paint hourCalculated automatically on every estimate
Body supplies$5 per body hourCalculated automatically on every estimate
Parts100% markup under $100, 35% overSpecial order parts require a non refundable deposit at order
Deposit50% at authorization over $2,000Additional 25% when parts arrive on jobs over $10,000
Sales tax7.75% on parts and materialsLabor is not taxed

Insurance billed jobs may be billed at carrier negotiated labor rates that differ from the posted retail rates above. See all posted rates.

07

Vehicles we do this work on

08

Questions about countertop repair and replacement

Frequently asked questions

How much does an RV countertop replacement cost?

Countertop work runs $500 to $6,500, or 4 to 28 hours at $210 per hour plus materials. A bath vanity top in laminate sits near the low end. A full galley in quartz with a support deck built underneath, an undermount sink, a scribed backsplash, and a matching dinette top sits at the high end. Slab material is billed at parts markup.

Can I put quartz or granite in an RV?

Yes, with two conditions. The cabinet run needs a continuous support deck built under it, because stone spanning open cabinet frame will crack at the narrow strip beside the sink. And you need the payload for it, since a galley run in quartz typically adds 90 to 160 pounds over laminate. We weigh it and tell you before you order the slab.

Is a chipped solid surface top repairable?

Usually yes, and that is the main advantage of solid surface in an RV. Chips, burns, and small cracks can be filled with color-matched material and sanded flush, and seams can be rejoined invisibly. Quartz and laminate do not repair this way, which is why solid surface is often the better long-term choice in a vehicle that flexes.

Why did my laminate countertop split at the sink?

The particle board substrate under the laminate absorbed water at the sink perimeter, swelled, and pushed the laminate apart. It is the most common countertop failure in an RV and it starts with a faucet base or a sink rim seal that let go years earlier. The fix is a new top plus correcting whatever was leaking, not resealing the split.

09

Related services

10

More interior and cabinetry work

Ready to move on countertop repair and replacement? Bring it to Yorba Linda.